Equipment--->Automotive tools

	BALL The hitch ball mounts to the ball mount or the weight distributing head. Hitch balls are available in different sizes and styles. Keep in mind the hitch ball weight rating should always be equal to or larger than the hitch and ball mount being used.
	BALL JOINT PRESS A ball joint press is used to remove the ball joints from a control arm that was pressed in from the manufacturer.
	BATTERY CHARGER, LARGE
	BATTERY CHARGER, SMALL
	CAR KADDY The CROFT tow dolly, with its independent torsion suspension and pivoting turntable, provides smooth safe towing and carefree cornering. Heavy duty positive grip low profile ramps are attached for easy loading and permanent storage. The frame is constructed of galvanized steel for strength and durability and features a tilt bed with positive automatic locking mechanism for fast easy loading.
	CHAIN & BINDER SET Transport chain, chain binders and heavy-duty ratchet binders for flatbed trucks and trailers are available.
	CLUTCH PILOT TOOL Assists in the proper installation of clutch plates and pilot bearings.
	COMPRESSOR, RING Special tool that is specifically designed for compressing the piston rings when a piston is re-installed.
	HOIST, ENGINE Kaydee Knockdown Lifts can be quickly taken apart, moved and assembled. They go wherever the job is: backyard, shop, warehouse, office tower or construction site. Maximum capacity: 1500 lbs.
	JACK, BOTTLE 12.5 TON Typical uses include the repair of automobiles and house foundations.
	JACK, BOTTLE 22.5 TON Typical uses include the repair of automobiles and house foundations.
	JACK, FLOOR Hydraulic jack that lifts vehicles so that maintenance can be performed.
	JACK, TRANSMISSION 1750 LB Unlike a conventional hydraulic floor jack or bumper jack which raises a vehicle using either the chassis, or the axles, a transmission jack is positioned centrally under the vehicle and lifts the transmission via a lifting platform attached to the transmission jack lift frame.
	MACPHERSON STRUT COMPRESSOR Quickly and safely compress coil springs in order to repair or replace struts, shock absorbers and spring sets in your car.
	PORT-A-POWER, 10 TON This is a convenient kit for heavy lifting in auto body, frame repair and other work.
	PULLER, LARGE These are the most common types of bearing pullers and can be used for pulling gears or bearings. The arms have fingers on the end that bend in to get behind the bearing to its race. The center screw of the puller is torqued so it pushes on the top of the shaft and upward thrust is applied to the bearing’s race. Arms and fingers are interchangeable so the same puller can accommodate a wide variety of bearing and shaft sizes and lengths.
	PULLER, PITMAN ARM Compact design of puller allows easy access to the Pitman arm. Live center on forcing screw and easy use of a standard wrench results in less effort required. Works on most domestic SUVs and pickups.
	PULLER, SLIDE This slide hammer and bearing puller set is designed especially for pilot bearings, needle bearings and other jobs that require an internal puller.
	PULLER, SMALL These are the most common types of bearing pullers and can be used for pulling gears or bearings. The arms have fingers on the end that bend in to get behind the bearing to its race. The center screw of the puller is torqued so it pushes on the top of the shaft and upward thrust is applied to the bearing’s race. Arms and fingers are interchangeable so the same puller can accommodate a wide variety of bearing and shaft sizes and lengths.
	PULLER, STEERING WHEEL Used to remove the steering wheel from your car or truck when making a repair to the steering wheel itself or when trying to access the floorboards.
	REAMER, RIDGE Use on a cylinder before taking the piston and connecting rod out.
	SOCKET SET, 3/4 When large bolts need turning, these 3/4-inch sockets get it done. Ideal for performing maintenance on large diesel engines as well as industrial and farm equipment.
	SOCKET, 3/4" DRIVE
	STAND, AXLE A support which can be placed under an axle, subframe or other suitable point when a vehicle is undergoing maintenance.
	STAND, AXLE LARGE A support which can be placed under an axle, subframe or other suitable point when a vehicle is undergoing maintenance.
	STAND, ENGINE When you have got an engine repair job that cant be completed while the engine block is in the vehicle, this engine stand provides a sturdy support structure that will secure the removed engine in mid-air, so you can access any part of it. Use an engine hoist or crane to remove the engine from the vehicle, then mount it to the faceplate on this engine stand.
	WASHER, HOT WATER GAS 3500 PSI GAS POWERED HOT WATER PRESSURE WASHER
	WELDER, GAS A/C
	WELDER, OXY/ACCT
	WRENCH, IMPACT 1/2" ELEC
	WRENCH, IMPACT 3/4" ELEC
	WRENCH, TORQUE 1/2 A torque wrench is used where the tightness of screws and bolts is crucial. It allows the operator to measure the torque applied to the fastener so it can be matched to the specifications for a particular application. This permits proper tension and loading of all parts.